Adaptation (learning): Step 1 (into the learning mode):trigger the key button, LED offs Step 2 (adapter channel 1): press the first button of remote control and then, LED offs after flashes for four times. At that time, clean code completion (Note: After the implementation of clean code, previous remote controls do not exist. Clean code: hold the button to press.LED offs, keep pressing about 8 seconds until LED lights. Delay: Under Delay mode, there is a delay 0/1/2/3/4 five sub-patterns, by adjusting the variable resistor IO port high duration 4, the adapter remote control (learning remote control) In normal operation mode, LED (D1) will be lit, when receiving a valid remote control (EV1527 / PT2262) key value, LED will flash. Interlock: Press the remote control button D0, D0 IO port outputs high, other IO ports outputs low remote control button is pressed D1, D1 IO port outputs high, other IO ports output low and so on. Press the remote control button again, IO port outputs low. Self-locking: Press the remote control button, the IO port outputs high. Release the remote control button, IO port outputs low. Adjustable resistor is a precision resistor, adjust the time with a Phillips screwdriver to gently rotate (do not use excessive force) Working Mode Description: Non-locking: Press the remote control button, the IO port outputs high. Increase the time counterclockwise rotation, and clockwise rotation to shorten the time. In delay mode, the rotary variable resistor can adjust the delay time. the working mode You can select different modes of operation with"M4 M3 M2 M1 M0" pad in the delay mode to adjust the delay time through an adjustable resistor. Pin Description G: GND pin, DC 3-5V power supply negative V: VCC pin, DC 3-5V positive power supply D0: channel 1 output, active high D1: channel 2 output, active high D2: Channel 3 output, active high D3: Channel 4 output, active high VT: channel output valid signal, the microcontroller can be used as an interrupt signal 3. Features: Operating voltage: DC 3-5V Operating current: less 11mA (DC 5V) Working priceple: super heterodyne modulation Mode: OOK / ASK Operating Frequency : 433.92MHZ Receiving sensitivity: -108dBm Output level: 5V TTL level, low standby, the maximum current 20MA (to add a current-limiting resistor) Decode: learning code, adapted EV1527 / PT2262 and a compatible remote control, you can store up to eight remote control Working modes: Non-locking (Momentary ), self-locking (Toggle), Inter-locking 0.1-500000 seconds adjustable delay time Size: 30x12.1x12.5mm Weight: 4 grams or less 2. Pakcing list : 1 pcs receiver + 1 pcs transmitter Receiver : Module No.: RF11A04 Description: Description: Model No.: RF11A04 OR CE-RF11A-045V 1. Item: 282706119407 433MHz PT2262 PT2272 für Arduiuo Encoder Decoder RF Verzögerung Wireless Link Kit. For the UK please choose the 433MHz version.Seller: canton-electronic ✉️ (25.144) 100%, When purchasing these modules please ensure that match the correct frequency for your Tx and Rx pair and that the operating frequency is legal in your country. Please note that we currently stock two versions of these modules operating at 315 or 433MHz. This makes them ideal for applications such as security systems, garage door controllers, home automation, and remote control. They provide an easy way of remotely controlling up to 4 channels without the need of a microcontroller. When used together they are a set of wireless modules operating at 433MHz and utilise the the Princeton Technology Corp PT2262 & PT2272 remote control encoder and decoder IC's. The PT2262 (Tx) transmitter module is designed to be used in conjunction with the PT2272-M4 (Rx) receiver module (Item HCMODU0049).
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |